Use
IG TPS 1000 may be used with most commercially available insulating glass primary sealants.
Preperation
The joint faces or surfaces to be bonded must be dry, clean and free from dust and grease.
Tech.
| Base | Synthetic polymers and desiccant |
| Color | Black |
| Consistency | Desiccated Thermoplastic Spacer |
| Notes | Processable only at elevated temperatures (+194°F to +248°F) |
Performance Testing
| Typical Values | Test Method | |
| Density | ||
| -A component | 10,4 lb/gal | ISO 1183-1 |
| MVI | 400 cm³/10 min | ISO 1133,5 kg |
| Penetration | 120 min. | ASTM D 1321 |
| Maximum Moisture Adsorption Capacity | 13,5 % by weight | EN 1279, part 2 |
Safety
Prior to working with this or any product consult product label and Material Safety Data Sheet (MSDS) for necessary health and safety precautions.
Storage
Store in a cool, dry and clean place. Desiccant Matrix for InterceptO may be stored at room temperature.
Use
IG Silicone Sealant may used with most commercially available insulating glass primary
Use
IG POLYSULFIDE SEALANT preperation may be used with most commercially available insulating glass primary sealants. The
Use
IG TPS 1000 may be used with most commercially available insulating glass primary
Use
IG HOTMELT may be used with most commercially available insulating glass primary sealants.
IG Hotmelt sealant is