Use
Primary sealant PIB 7000 may be used with most commercially available urethane, silicone, polysulfide or butyl hot melt insulating glass second ary sealants.
Preperation
The clean and degrease glass and metals. Primer is not required. PIB 7000 is supplied ready for use but must be heated to approx. +110°C to +130°C for aplication. The product is applied with heated butyl extruders.
Tech.
| Base | Synthetic rubber (polyisobutylene), solvent-free |
| Color | Grey |
| Consistency | Solid compound |
| Notes | Can only be applied using a heated butyl extruder |
Performance Testing
| Typical Values | Test Method | |
| Density | approx. 1,05 g/cm³ | DIN 53 379, +23°c |
| Gas Permeability | < 0,001 g/m²•h | EN 1279,4 |
| Water vapour Transmission Rate | < 0,1 g/m²•d | EN 1279,4 |
| Volatile Content | 0,5% | EN 1279,6 annex G |
Safety
Prior to working with this or any product consult product label and Material Safety Data Sheet (MSDS) for necessary health and safety precautions.
Storage
Store material in original unopened packaging at temperatures between 25°C – 40°C