Use
PIB 2000 may be used with most commercially available urethane, silicone, polysulfide, or butyl hot melt insulating glass secondary sealants
Preperation
The surfaces to be bonded mu be dry, clean and free from dust and grease. Glass surfaces should be thoroughly cleaned by hand or machine with non-film forming low residue detergent and rinsed thoroughly with clean hot water.
Tech
| Base | Synthetic rubber (polyisobutylene), solvent-free |
| Color | PIB 2000 (Black) |
| Consistency | Solid compound |
| Notes | Can only be applied using a heated butyl extruder |
Performance Testing
| Typical Values | Test Method | |
| Density | approx. 1,05 g/cm³ | DIN 53 379, +23°c |
| Gas Permeability | < 0,001 g/m²•h | EN 1279,4 |
| Water vapour Transmission Rate | < 0,1 g/m²•d | EN 1279,4 |
| Volatile Content | 0,5% | EN 1279,6 annex G |
Safety
Prior to working with this or any product consult product label and Material Safety Data Sheet (MSDS) for necessary health and safety precautions.
Storage
Store material in original unopened packaging at temperatures between 25°C- 40°C